Search the Forums

Key Word

Forum
Specialist Forums > Equipment Forum > cressi archimede ii
Author 
Message
jon w
posted : February 21, 2009 Post subject: cressi archimede ii
HI EVERYONE,just completed firt dive with the above.where i expected NDLto be,i had a reading of dive time in minutes,and where i expected dive time to be i had seaconds reading.AN ANYONE HELP.many thanks jon w.

 
npt
posted : February 21, 2009 Post subject: cressi archimede ii
Hi Jon,
I assume you have the computer set to dive. If so maybe there could be a software fault. Could be worth speaking to Denny Diving. Those guys are very helpful. Hope this helps.

 
Rod
posted : February 22, 2009 Post subject: cressi archimede ii
Does sound like it is in gauge mode rather than dive mode.

 
jon w
posted : February 22, 2009 Post subject: cressi archimede ii
thanks for takingthe time to reply.i will contact the company next week MANY THANKS JON

 
jon w
posted : February 22, 2009 Post subject: cressi archimede ii
hI ROD.thanks for taking the time to reply.i believe u r right.whilst im getting depth and max depth,in the bottom left cnr it reads GAGE.DO u know how to correct this or do u suspect its a soft ware problem as NPT sugested

 
jon w
posted : February 23, 2009 Post subject: cressi archimede ii
thank u all ,problem solved

 
About us | Disclaimer & terms of use | Contact us | Site News | Suggestions | Link to us | Advertising Info
© 2006 Personal Print Ltd