Search the Forums

Key Word

Forum
Specialist Forums > Equipment Forum > Cylinder Setup
Author 
Message
Jamiek
posted : July 5, 2007 Post subject: Cylinder Setup
Am thinking of buying a 15l cylinder and a 3l pony but am not sure what kit i will need and how to set this all up. Any advice would be great.

Cheers Jamie

 
Ootini
posted : July 24, 2007 Post subject: Cylinder Setup
For the 15 you would need a standard 1st stage, 2nd stage, Octo and contents system. Most standard reg packages would do the trick, just make sure you get the right fitting, A-Clamp / Din. For your pony you would need a 1st stage, 2nd stage and contents guage, again with the correct fitting. Then you would get a pony clamp to attach the pony to the side of the 15. A word of advice, to make sure you can tell the regs apart the best bet is to choose "very" different reg patterns for the 15 versus the pony. For example Poseidon Jetstreams for the 15 and then maybe an Apeks style reg for the pony, then even in the dark you can tell which reg you're using.

 
About us | Disclaimer & terms of use | Contact us | Site News | Suggestions | Link to us | Advertising Info
© 2006 Personal Print Ltd