Posted by sheldo on January 13, 2003 at 21:16:07:
In Reply to: Re: johnson evinrude fule tank posted by sheldon on January 13, 2003 at 21:10:37:
: : pump rebuild kit ?
on the gas tank where do u get
: : : : looking for a two line pressure fuel tank to fit either johnson or evinrude engine
: : I am rebuilding a couple of these puppies but they can be expensive.You can find a used one on e-bay for around sixty dollars,but no telling how it will work,most of these things are rode hard and hung up wet,not to mention they are fifty years old.When I rebuild one,I sandblast the whole dissassembled works,etch with acid,seal with us por gas tank paint,paint outside with omc paint on top of chromate primer,and add original decals at 32 dollars a pop.It takes 20 hours to rebuild the pump unit with a 23 dollar kit that only comes from one source,then you have to add new hose and rebuild the end fitting,if you can find one.Send me an e-mail